Feature:

• 3 in 1 Surge Arrester features rail mounted signal, video and power protection modules in both the cabinet and lowering device provide the ultimate protection from lightning induced surges.
• This CCTV Video Surge Arrester is designed to protect monitor equipments (power, Video), widely applied in bank monitor and safe guard system.
• Monitor equipment for school, enterprise, road etc. Security and protection.
• Large electric current support, mutiple level protection, quickly response, minor wastage.
• Surge Lightning Arrester comes with an integrated braided ground lines to divert surge energy.
• Coaxial Lightning Arrester standard BNC interface
• This Monitor Surge Arrester is simple to operate.

Specification:

• The typical model applies	monitor system
  Operation voltage	0-220V
  Max. continuous operating voltage Uc	AC265V
  Normal discharging current (8/20 us) In(kA)	5KA
  Max. discharging current(8/20 us) Imax (kA)	10KA
  Response time(ns)	1-25ns
  Insertion loss	≤0.2 dB
  Interface	BNC & Screw terminal block
  I/O interface	BNC
  Protected Core:	Coaxial type
  Ambient temperature	-40°Cto 85°C
  Outer covering material	Aluminum Alloy
  Dimension(mm)	108mmx48mmx26mm
  Test grade	IEC61643—21:2000

Installation and Maintenance:

• These products should connect the corresponding position of protective equipment in series.
• The section of the grounding line should be more than 4 mm and be as short as possible.
• These surge protectors needn't any maintenance. There is need to inspect and record the work situation of them after the lightning and thunderstorms.
• Note: 
  
  Video: The circuitry connects with the input terminal of the surge protector (IN) and the output terminal (OUT) connects with the protective equipment. And the both terminals must not be reversed. 
  
  Data: The circuitry connects with the DATA "A" and "B" of the input terminal of the surge protector (IN) and the DATA "A" and "B" of the output terminal (OUT) connects with the protective equipment. And the both terminals must not be reversed.
  
  Power: Connect the circuitry with the input terminal of the surge protector (IN) and the output terminal (OUT) connects with the protective equipment. DC power ends connect the corresponding "+" and "-" , For your Safety the max power supply is not more than 34V

Packing including:

1 x CCTV Surge Protector